Using the Operator Panel
ADVANCED OPERATION GUIDE 2-79
3
Press Z.
4
Press U or V repeatedly until >Sleep
Timer > appears.
5
Press Z and display >>Auto Sleep.
6
To turn off the sleep timer, press [OK]
([ENTER]). A blinking question mark (?)
appears.
7
Press U or V to change On to Off.
8
Press [OK] ([ENTER]). The sleep timer is turned off.
9
To exit the menu selection, press [MENU].
Sleep Timer Timeout Time
You can adjust the length of time the printer waits before entering Auto
Sleep in the absence of data.
The printer reverts to normal operation mode when the printer receives a
print job, the operator panel is operated, or one of the exterior covers is
opened.
NOTE: Color calibration is automatically executed before the printer
reverts to normal operation mode.
1
Press [MENU].
2
Press U or V repeatedly until Others >
appears.
3
Press Z.
4
Press U or V repeatedly until >Sleep
Timer > appears.
>Sleep Timer >
005 min.
>>Auto Sleep
On
>>Auto Sleep
? On
>>Auto Sleep
? Off
Others >
>Sleep Timer >
005min.
To Next Page
Loading...
