Using the Operator Panel
ADVANCED OPERATION GUIDE 2-83
FS-C5015N and FS-C5025N
1
Press [MENU].
2
Press U or V repeatedly until Others >
appears.
3
Press Z.
4
Press U or V repeatedly until Buzzer >
appears.
5
Press Z.
6
Press U or V to display the desired alarm. The display changes as shown
below.
Error
Ready
Job End
Key Confirm.
7
Press [OK] ([ENTER]). A blinking question
mark (?) appears.
8
Select On or Off using U or V.
9
Press [OK] ([ENTER]).
10
To exit the menu selection, press [MENU].
FS-C5030N
1
Press [MENU].
2
Press U or V repeatedly until Others >
appears.
3
Press Z.
4
Press U or V repeatedly until Buzzer
appears.
Others >
>Buzzer >
>>Error
? On
Others >
>Buzzer
On
To Next Page
Loading...
