Using the Operator Panel
2-88 ADVANCED OPERATION GUIDE
Sample Color Registration Correction Chart
9
Press U or V repeatedly until >>Adjust
Cyan appears.
10
Press [OK] ([ENTER]). 0 or 00 will be
displayed for each value and the cursor will
flash under the left (L) value.
11
Look at the left chart (L) in the cyan portion of the color registration
correction chart. Find the two lines that most seem to overlap as a single
straight line and note the number value listed there. In the example below
the value would be -2. (Be careful of plus [+] and minus [-] numbers.)
>>Adjust Cyan
L= H= R=
>>Adjust Cyan
L= 0
H= 00 R= 0
To Next Page
Loading...
