Using the Operator Panel
2-12 ADVANCED OPERATION GUIDE
> is displayed before the sub-menu.
Press Z to move to another sub-menu or Y to go back.
>> is displayed before the second sub-menu.
Setting a Menu
Select the desired menu and press [OK] ([ENTER]) to set or change the
configuration.
Press U or V to display the desired item and [OK] ([ENTER]) to finalize
the value or selections set.
Cancelling Menu Selection
If you press [MENU] when a menu is selected, the message display
returns to Ready.
>Type Adjust >
Indicates that there is another sub-menu
Indicates that this is the sub-menu
>>Paper Weight
Normal 1
Indicates that this is the second sub-menu
To Next Page
Loading...
