Using the Operator Panel
2-28 ADVANCED OPERATION GUIDE
1
Press [MENU].
2
Press U or V and select e-MPS >.
3
Press Z.
4
Press U or V and select >e-MPS
Configuration >.
5
Press Z.
6
Press U or V and select >>VMB Size.
7
To change the maximum size, press [OK]
([ENTER]). The message display shows a
blinking cursor (_).
8
Press U or V to increase or decrease, respectively, the value at the
blinking cursor. Use Z and Y to move the cursor right and left.
9
When the desired size is displayed, press [OK] ([ENTER]).
10
Press [MENU] to exit the menu selection.
e-MPS >
>e-MPS >
Configuration
>>VMB Size
1550MB
>>VMB Size
1550
MB
To Next Page
Loading...
