Using the Operation Panel 4-55
Paper Feed Mode (Setting the paper feed source)
This mode specifies how the paper should be fed once the paper feed
source and paper type have been chosen. If Auto is selected, the printer
searches for a paper feed source that matches the paper size and type,
and paper is then delivered from that source. If Fixed is selected and
there is no matching paper feed source, handling proceeds as specified
by Paper Mismatch for Error Handling. For details on paper
feeding when Fixed is selected, refer to Paper Mismatch (Detection
settings for paper size/type errors when the paper source is fixed) on
page 4-80. The default setting is Auto. To change the settings, follow the
steps described below.
1 In the Print Settings menu, press U or V to select Paper Feed
Mode.
2 Press [OK]. The Paper Feed Mode screen appears showing the
available paper feed options.
3 Press U or V to select the desired paper feed mode.
4 Press [OK]. The paper feed mode is set and the Print Settings menu
reappears.
When the Paper Runs Out During Printing
When Paper Feed Mode is set to Fixed, if the paper in the cassette
runs out during printing, Add paper in cassette 1. is displayed and
the printer stands by. In this event, either replenish the paper in the empty
cassette or use the procedure below to print from another paper source.
1 While Add paper in cassette 1. is displayed, press [Alt.]
([Left Select]). The Alternative menu screen appears.
2 Press U or V to select the desired paper feed source and paper size.
Each time you press U or V, another optional cassette or the paper
size that can currently be fed from the MP tray appears.
3 Press [OK]. Printing continues.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
