What to do if Kyocera FS FS-9530DN showing Call service F###?
If your Kyocera printer displays 'Call service F###', it indicates a controller error. You will need to call for service, as the printer will not operate when this message is displayed.
What to do if Kyocera FS FS-9530DN showing Characters out of position?
If the characters are out of position when printing with your Kyocera printer, check the file or program you are printing from. Determine whether the problem is caused by a PRESCRIBE command error.
What to do if Kyocera Printer showing Add staples Press GO?
If your Kyocera printer displays 'Add staples Press GO', it means no staples are installed in the stapler. Set staples in the stapler. If you wish to continue printing without the staple function, press [GO].
Why Kyocera FS FS-9530DN is not printing from computer?
If your Kyocera printer isn't printing from the computer, it could be due to an error. Check the message display on the printer and take actions based on the information provided in the Indicators and Messages section.
What to do if Kyocera Printer showing Error. Power off F###?
If your Kyocera printer displays 'Error. Power off F###', try turning the power switch off and then back on again. If the message persists, turn the power off and contact your service representative or authorized service center.
Why Kyocera Printer showing Unknown toner installed?
The message 'Unknown toner installed' on your Kyocera printer may appear if a toner container that indicates 'Toner low' or 'Replace toner Clean printer' is installed in other printers of the same model.
What to do if Kyocera FS FS-9530DN Printer showing Replace toner Clean printer?
To resolve the 'Replace toner Clean printer' message on your Kyocera printer, replace the toner container with a new toner kit.
What to do if Kyocera FS FS-9530DN showing Cassette # not loaded?
If your Kyocera printer displays 'Cassette # not loaded', it means a cassette is not loaded properly. Properly load the cassette indicated by #.
How to clean Dirt on the top edge or back of the paper from Kyocera FS FS-9530DN?
To clean dirt from the top edge or back of the paper on your Kyocera printer, open the printer's left cover and check for toner on the paper ramp. If present, clean the paper ramp using a soft, dry, lint-free cloth. Also, check the transfer roller; if it's dirty with toner, try printing several pages.
How to troubleshoot Black or white vertical streaks on Kyocera FS FS-9530DN?
To troubleshoot black or white vertical streaks on your Kyocera printer, clean the charger using the printer's built-in cleaning system via the operation panel.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Processor | 400 MHz |
| Connectivity | USB, Ethernet |
| Memory | 512 MB |
| Operating System Compatibility | Windows, Mac, Linux |
Step-by-step instructions for installing the printer driver software from the provided CD-ROM.
Guides users on how to print documents from application programs using the printer's settings.
Details the procedure for replacing the toner container, including messages and frequency.
Addresses issues related to print output quality, providing specific corrective actions for different results.
Provides detailed procedures for identifying and clearing paper jams in various printer locations.
To Next Page