13
3) When “Print” button is clicked, output starts.
Setting Items
[General Settings]
Job Count:
Number of Set Job
Collate:
Check Collate ON
No check Collate OFF
Density:
Set Image Density
When input value is smaller, it shows lighter image, and vice versa.
1 - 13
Header:
When Header output is set to effective, following information is
printed out at the leading or trailing edge of output.
Printed information:
Requester, Job Number, File Name, Date/Time
When button is clicked, following dialog is popped up.
To Next Page
Loading...
