28
[Original Size Compensation Settings]
It is possible to specify the magnification of x-direction and y-direction
independently for each media.
The print size can be compensated caused by media expansion and
contraction by this.
When “Enable Original Size Compensation” is checked, the
magnification compensation is effective for each media
(Plain/Vellum/Film).
It is possible for each media to compensate the magnification of
x-direction (Width) and y-direction (Length) independently.
The compensation ranges are guaranteed between 90% and 110%.
(0.1% step)
Note: If some of the above items are modified, click [Enter]
button, and register the configuration.
To Next Page
Loading...
