iTag
Specification/Setup/Operation
Copyright © 2005~2007 Kyocera Mita America, Inc Version 8.0
3. Browse to the newly Saved file and open the file in Notepad. The Following is the lay out of the Text
File (XXX|Display Name|PC Address|SFU Save No.|Organization). The Separator is the Pipe
Character ( | ). You can begin entering the names of the other Scan To PC Locations. When completed
click File and Save to save this file.
4. From with in Device Manager, click on the desired MFP, Click the Device Tables Tab, PC List Tab.
Click the desired MFP and click the Import Button.
All Rights Reserved. Page 88
To Next Page
Loading...
Need help?
General
