Kyocera KM-NET Manual

12
3 Press [] or [] to display Change Admin. ID.
4Press [ENTER]. The cursor blinks on the operator panel.
5 Enter the first digit of the new account code. Press [ ] or [ ] to enter a number
(0 through 9).
6 Press [ ]. The number is entered and the cursor auto moves to the next right
position. Repeat step 5 and this step at each position to enter all 15 digits of the
new administration ID.
7Press [ENTER]. OK? appears on the operator panel.
8 Make sure the entered administration ID is correct, then press [ENTER]. The
administration ID is changed and Account Management On appears on the
operator panel.
9Press [MENU]. Ready is displayed again on the operator panel.
>Change Admin.ID

>Change Admin.ID

>Change Admin.ID
1 
>Change Admin.ID
123456789012345
OK?
123456789012345
Account >
Management On
Ready

Kyocera KM-NET Specifications

General

Brand	Kyocera
Model	KM-NET
Category	Printer
Language	English