Kyocera Mita FS-1128MFP Setup Guide

Preparations
4 SETUP GUIDE
3
Slide the Shipping Lock to the unlock
position.
IMPORTANT: When installing the Document Processor, refer to Installation Guide
attached to the Document Processor.
4
Attach the Guide Case to the machine right
as required.
Installing Toner Container
1
Open the front cover.
2
Remove the process unit from the machine.
IMPORTANT: Place the process unit on a
clean, level surface where it will not be
exposed to any sort of impact or shock. The
drum in the process unit is sensitive to light
and should not be exposed to normal office
lighting for more than five minutes.
3
Check the lock lever to the UNLOCK
position.
Shipping Lock
Guide Case

Kyocera Mita FS-1128MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	20, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Print Speed	28 ppm
Copy Speed	28 cpm
Standard Paper Capacity	250 sheets
Automatic Document Feeder (ADF)	50 sheets