Kyocera Mita FS-1128MFP Setup Guide

Preparations
6 SETUP GUIDE
9
Align the pins on both sides of the process
unit with the guides inside the machine, and
slide the process unit into the machine until
it stops.
10
Close the front cover.
Loading Paper
1
Carefully pull the cassette all the way out of
the machine and remove the protective
packing from inside the cassette.
2
Adjust the paper length by pressing in on
the release buttons and sliding paper
stopper to fit the size of the paper. The
paper sizes are marked on the bottom of the
cassette.
3
Adjust the paper width by pressing in on the
release buttons and sliding the guides to fit
the width of the paper.
4
Fan the paper, then tap it on a level surface
to avoid media jams or skewed printing.

Kyocera Mita FS-1128MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	20, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Print Speed	28 ppm
Copy Speed	28 cpm
Standard Paper Capacity	250 sheets
Automatic Document Feeder (ADF)	50 sheets