Kyocera Mita FS-1128MFP User Manual

Status / Job Cancel
OPERATION GUIDE 7-19
7
Pause and Resumption of Jobs
Pause /resume all printing jobs in printing/waiting.
The procedure for pausing and resuming jobs is explained below.
1 Press the Status/Job Cancel key. The Status
menu appears.
2 Press the U or V key to select [Print Job Status].
3 Press the OK key. Print Job Status appears.
4 Press [Pause] (the Left Select key). Printing is
paused.
When you press [Resume] (the Left Select key) to
resume printing.
NOTE: When you press the Back key, a confirmation
screen appears. Press [Yes] (the Left Select key) to
resume printing.
Canceling of Jobs
For canceling jobs, refer to Canceling Jobs on page 3-31.
Status: a b
*********************
2 Send Job Status
3 Store Job Status
[ Pause ]
1 Print Job Status
Print Job Status: a b
*********************
0009 r maury’s data
0010
y aaaa
[ Pause ] [ Menu ]
0008 r Copy r
Pausing: a b
*********************
0009 r maury’s data s
0010
y aaaa s
[ Resume ] [ Menu ]
0008 r Copy s
Resume paused jobs.
Are you sure?
[ Yes ] [ No ]

Kyocera Mita FS-1128MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Monthly Duty Cycle	20, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 Kbps
Print Speed	28 ppm
Copy Speed	28 cpm
Standard Paper Capacity	250 sheets
Automatic Document Feeder (ADF)	50 sheets