Kyocera TASKalfa 1800 - Page 296

2NC/2NF/2NG/2NN/3P7/3P8/3P9
1-5-18
5. Remove two screws.
6. Release four hooks and then remove
the operation panel assembly upward.
Figure 1-5-27
7. Remove the DP connector cover by
releasing two hooks using flat screw
driver.
Figure 1-5-28
Screw
Screw
Operation panel
assembly
Hook
Connector
Operation
panel PWB
Flat screwdriver
Hook
Hook
DP connector cover