2R4/2R5/2R6
6-22
Contents
Change the maintenance mode ID for service.
Purpose
Modify maintenance mode ID for service for more security.
Method
1.Press the [Start] key.
2.Select the item to set.
Method: Change
1.Select [New ID].
2.Press ten keys (0–9, *, #) to enter a new 8-digit ID.
* :Either [*] or [#] must be included.
3.Press the [Start] key to set the setting value.
4.Select [New ID(Reconfirm)].
5.Press ten keys (0–9, *, #) to re-enter the new 8-digit ID.
6.Select [Execute].
7.Press the [Start] key to set the setting value.
Method: Initialize
1.Select [Initialize].
2.Select [Execute].
3.Press the [Start] key to initialize the maintenance mode ID.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Error codes
U010 Setting the maintenance mode ID
(Message: Set Mainte ID)
Items Contents
Change Change the maintenance mode ID for service.
Initialize Initializes the maintenance mode ID for service.
Items Contents
New ID Enter a new 8-digit maintenance ID
New ID(Reconfirm) Enter a new 8-digit maintenance ID (to confirm)
Execute Change the maintenance mode ID for service.
Codes Contents
0001 Do not include "#" or "*" in the ID.
0002 ID does not match.
0003 8-digit ID is not input
To Next Page
Loading...
