Why is there no print output after reception on my Kyocera Fax Machine?
If there's no print output after reception on your Kyocera Fax Machine, check if memory forwarding is activated and verify the forwarding destination.
Why Kyocera Fax Machine cannot receive 2 in 1 reception?
If your Kyocera Fax Machine cannot receive 2 in 1 reception, cancel the duplex printing.
Why Kyocera Fax Machine cannot use the remote switching function?
If your Kyocera Fax Machine cannot use the remote switching function: 1. If a pulse line is used, some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set. 2. Check if the remote switching number is correct (Default: 55). 3. Ensure you press the remote switching number twice slowly.
What to do if Kyocera Fax Machine cannot perform memory forwarding?
If your Kyocera Fax Machine cannot perform memory forwarding, check the memory forwarding setting to ensure it is set to [On].
Why Kyocera Fax Machine cannot perform memory forwarding using a sub address?
If your Kyocera Fax Machine cannot perform memory forwarding using a sub address, it might be because the recipient fax machine does not have a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. Also, ensure that the entered sub address is identical to the sub address registered in the recipient fax machine; if your entry is correct, check with the recipient.
General| Print Speed | 45 ppm |
|---|---|
| Standard Paper Capacity | 1, 150 sheets |
| Functions | Print, Copy, Scan, Optional Fax |
| Maximum Paper Size | 12" x 18" |
| Duplex Printing | Standard |
| Copy Speed | 45 cpm |
| Copy Resolution | 600 x 600 dpi |
| Print Resolution | 600 x 600 dpi |
| Memory | 2 GB RAM |
| Hard Disk Drive | 320 GB |
| Connectivity | USB |
| Control Panel | Color Touch Screen |
| Scan Resolution | 600 x 600 dpi |
| Fax Resolution | 400 x 400 dpi |
| Type | Multifunctional |
To Next Page