Kyocera TASKalfa 4550ci - Page 485

2LK/2LN/2LM/2LC
1-5-67
9. Remove four screws and the remove
the fuser IH PWB cover.
10. Remove the IH electric wire cover.
Figure 1-5-108
11. Release two wire saddles.
12. Remove four connectors from the fuser
IH PWB.
Figure 1-5-109
Screws
Screw
Screw
IH electric wire cover
Fuser IH PWB cover
Fuser IH PWB
Wire saddle
Wire saddle
Connector
Connectors
Connector