Digital OverVoltage Relay (GDR-C01) User's Manual V1.00
Kyongbo Electronics Co., Ltd.
• Do not perform any wiring work while the power is on or
the product is in operation.
It may cause an electric shock.
• Must verify the status of the grounding connection before
starting the operation.
Otherwise, it may cause an electric shock, damage, or a fire.
• Do not operate the product with wet hands.
It may cause an electric shock.
• Do not use if the clothing of the cable is damaged.
It may cause an electric shock.
• Do not perform any wiring work when the main cable is live.
It may cause an electric shock, and a damage or a fire by the charged voltage
of the converter.
• Do not disassemble the product even if the power is not
on, except for wiring or maintenance.
It may cause an electric shock by the charged current in the product.
• Let the electrical technician to perform wiring, test run,
and maintenance.
Otherwise, it may cause an electric shock or a fire by a wrongful operation.
• Perform terminal work when cutting a cable.
Otherwise, it may cause an electric shock from the naked part of the cable.
• Place the terminal cover on the terminal in the back after
the wiring work.
Otherwise, it may cause an electric shock.
To Next Page
Loading...
