Kyosho Mini-Z MR-03 series User Manual

I.C.S. Adaptor Set Manual
For Mini-Z MR-03 Series, Mini-Z ASF 2.4GHz Series and dNaNo FX Series models
Please read and understand this instruction manual
thoroughly before using this product.
●
Before Use
・
KYOSHO CORPORATION accepts no responsibility for
any consequences resulting from the use of this product.
By using this product the user accepts full responsibility.
・
Even if KYOSHO CORPORATION receives a
report relating to malfunction or other issues, it
gives no undertaking to repair, modify or add
functionality to the product.
・
Company or organization names, and product
names referred to in this instruction manual are
the trademarks or registered trademarks of the
respective companies or organizations.
・
When used with Mini-Z MR-03 Series, Mini-Z ASF
2.4GHz series or dNaNo FX series models, this software
is provided at no charge. However, the copyright of this
software is owned by Kondo Kagaku Corporation and
therefore unauthorized copying, sharing or reverse
engineering or similar activities are prohibited.
・
Modifications may be made due to improved
display screen performance.
This product is used to connect Mini-Z MR-03
Series, Mini-Z ASF 2.4GHz series or dNaNo FX
series models to a personal computer, and
through a special software program it can adjust
steering and throttle settings.
*Standard settings are set at time of shipment.
●
System Requirements
・
Computer with Microsoft Windows 2000 or
Windows XP and one available USB port (1.1 or
2.0).
・
Windows 2000 or Windows XP (Normal function
with emulators is not guaranteed).
・
CD-ROM Drive
No. 82080
Instruction Manual
・Mini-Z MR-03 Series, Mini-Z ASF 2.4 GHz series or dNaNo FX series model
・ICS USB Adapter
・CD-ROM
・Extension Cable
・
4-pin Cable
●
Set Contents
●
Required for Operation
1

Kyosho Mini-Z MR-03 series Specifications

General

Chassis	MR-03
Drive Type	RWD
Motor	Brushed
Suspension	Rear rigid axle
Wheelbase	90mm, 94mm, 98mm
Battery	AAA x 4

Summary

Setup and Driver Installation

ICS USB Adapter Connection and Driver Installation

Connects the ICS USB Adapter and installs its essential software drivers for computer communication.

USB Serial Port Driver Installation

Installs the USB serial port driver, crucial for establishing a serial connection with the adapter.

Confirm COM Port Configuration

Verifies the correct COM port assignment after driver installation to ensure successful connectivity.

Software Management and Download

Software Programs Overview

Lists available software executables for Mini-Z MR-03, ASF 2.4GHz, and dNaNo FX series models.

Copying Software from CD-ROM

Guides users on copying software from the CD-ROM to their computer for optimal performance.

Software Download Procedures

Download URLs and Steps

Provides direct website links and step-by-step instructions for downloading the latest software versions.

Connecting and Powering On the Model

Physical Cable Connections

Details how to connect the ICS USB Adapter, Extension Cable, and I.C.S. Cable to the model.

Power On and Pairing Process

Guides on powering on the model with the pairing switch pressed and verifying the LED indicator.

Launching the Control Software

Instructs on how to start the specific software program after it has been successfully copied to the computer.

Understanding the Software Interface

Software Interface Layout

Explains the graphical interface and default settings for various Mini-Z and dNaNo FX model software.

Parameter Functions Explained

Describes the purpose, settings, and effects of each adjustable parameter within the software.

Button Functions and Usage

Details the operations of key buttons like Program, Read, Reset, Load, Save, and Exit in the software.