Kyvol Cybovac E31 - Page 33

33
Flashing Red Indicators
Beep(s)
Likely Cause
Solution
1 beep
The gyroscope or the
optical flow sensor is
abnormal.
Please place the robot on a
flat surface and reboot it,
check whether there is
dust or oil residue left on
the cover of the optical
flow sensor.
2 beeps
The Bumber on the robot
loses it elasticity.
Please gently Press on the
left, middle, and right of
the bumper to check
whether it can pop out.
3 beeps
The Anti-drop Sensors of
the robot are covered or
dirty.
Please clean the Anti-drop
Sensors with a damp cloth.
4 beeps
The battery of your robot
gets critical low.
Please manually get your
robot to the Charging Base
to fully charge it.
CAUTION
RISK OF EXPOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The Symbol indicates DC voltage.
RECYCLING