L-Acoustics ARCS - Figure 23: Rigging Procedure for a 3 Enclosure ARCS Array

L-ACOUSTICS ARCS Manual V2.0 2/13/2003 40
(1) 2 x BUMP3 and 1 x LIFTBAR required for rigging 1, 3 or 5 ARCS
(2) 2 x ARCOUPL installed on the bottom of the array, 2 x BUMP3 installed on top
(3) The final flown assembly (refer to the Rigging Reference Chart for hole selection to provide the
desired tilt angle for the array)
Figure 23: Rigging Procedure for a 3 Enclosure ARCS Array