L3 Communications FA2100 - Page 258

COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Page 306
Nov. 01/98
Disassembly
23–70–04
(b) For Post-MOD DOT 6 / Pre-MODT DOT 13 units only, carefully tilt the
CSMU memory assembly to the left side (same side as cable) to gain ac-
cess to the J5 connector located on the Acquisition Processor PWA
(1-175).
Carefully unplug P1 of the Memory Interface Cable Assembly from J5 on
the Acquisition Processor PWA. Note the pins of J5 can be easily dam-
aged if handled incorrectly.
Recorder
Chassis
Memory Interface
Cable Assembly
P1
J1
Acquisition
Processor PWA
(AP)
CSMU
Memory Assembly
(1‐185)
(1‐175)
J5
(1‐5)
Figure 304. CSMU Memory Assembly Removal Diagram (POST-MOD DOT 6 &
PRE-MOD DOT 13)
Dec. 09/1
3
Rev. 13 Page 306