La Cimbali M2 - Data Menu: Counter Readings

EnglishEnglish
9. DATA menu: COUNTERS
Once you have entered the programming menu, access the DATA
MENU, pressing the i (27) key. The following will be displayed:
Use the + (30) and - (31) keys to position the cursor on the
COUNTER line, then press the PRG (29) key. The following will appear
on the display:
Þ DATA MENU
COUNTERS MENU
TEST
INFO
MALFUNCT. ARCHIVE
+
u
ÞCOUNTERS MENU
N° coffee 25
N° milk 15
N° water 10
N° steam 5
N° steam+air 9
N° tot coffee 56
N° cycles 95
+
u
ÞCOUNTERS MENU
N° MSX 25
N° MDX 41
Hours 120
+
u
Parameters calculated are:
- N. coffee (number of coffee beverages)
- N. milk (number of milk beverages)
- N. water (number of times water is dispensed)
- N. steam (number of times steam is dispensed using the turbosteam
function)
- N. steam + air (number of times steam and air are dispensed using
the turbosteam function)
- N. tot coffee (total number of coffee beverages)
- N. cycles (total number of cycles performed)
- N. Msx (number of grinding phases performed by the left grinder)
- N. Mdx (number of grinding phases performed by the right grinder)
- Hours (Machine life time)
Counters can be zeroed by aligning the cursor on the selected entry,
pressing the PRG (29) key, and then pressing the + (30) or - (31)
key.
Note: Parameters that cannot be zeroed are:
- N. tot coffee
- N. cycles
- N. Hours