Model: 616-146v2 www.lacrossetechnology.com/support Page | 3
SET TIME ALARM
1. Hold the ALARM button to enter alarm time set mode.
2. Use the +/TEMP or -/TIME buttons to adjust values.
3. Press the ALARM button to confirm adjustments and move to the
next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
Press the ALARM button once to view alarm time.
Press the ALARM button again to activate the alarm.
Bell icon appears.
Press the ALARM button again to deactivate the alarm.
The bell icon disappears.
SNOOZE (Silences alarm temporarily)
Press the SNOOZE/LIGHT button to silence alarm for 9 minutes.
Zz will show.
When in snooze mode, press ALARM to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely.
BACKLIGHT AND PROJECTION INTENSITY
Press and release the SNOOZE/LIGHT button to adjust the
brightness of the backlight and projection image (together):
High
Low
OFF
Note: When the Adapter is NOT in use, the High/Low/On/Off features
are not available.
PROJECTION (On/Off, rotate, projection mode)
Battery Power: Press and release the SNOOZE/LIGHT button to
show the projection for 10 seconds.
A/C Power: Projection is displayed constantly unless turned off.
Note: Projection will not display constantly when operating on battery
power.
To Next Page
Loading...
Need help?
General
