La Crosse Technology 616-146v2 Quick Setup Guide

Model: 616-146v2 www.lacrossetechnology.com/support Page | 5
TEMPERATURE TREND INDICATORS
The temperature (2°F/1°C) trend indicators update every 30 minutes
or less.
 Temperature has risen in the past 3 hours.
 Temperature has not changed in the past 3 hours.
 Temperature has fallen in the past 3 hours.
SEARCH FOR OUTDOOR SENSOR
 Hold the +/TEMP button for 3 seconds to search for the outdoor
sensor .
CARE AND MAINTENANCE
 Do not mix old and new batteries
 Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
 Always purchase the correct size and grade of battery most
suitable for the intended use.
 Replace all batteries of a set at the same time.
 Clean the battery contacts and also those of the device prior to
battery installation.
 Ensure the batteries are installed correctly with regard to polarity
(+and -).
 Remove batteries from equipment with is not to be used for an
extended period of time.
 Remove expired batteries promptly.
RESTART
If the outdoor temperature displays dashes:
 Remove the AC adapter and remove batteries from the projection
alarm &sensor.
 Press a button 20 times.
 After 15 minutes, return to Step 1 under Get Started.
POSITION OUTDOOR SENSOR
 Mount the outdoor sensor on a North-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.

La Crosse Technology 616-146v2 Specifications

General

Brand	La Crosse Technology
Model	616-146v2
Category	Alarm Clock
Language	English