TIME ALARMS
Your clock allows you to wake up to sound or to light. Both alarm can be set at the same time.
Set Sound Alarm:
1. Hold SOUND ALARM 2 for 3 seconds to enter alarm settings. Alarm hour will flash.
2. Press the + or - buttons to adjust hours.
3. Press the SOUND ALARM 2 button to confirm and move to minutes. Alarm minutes will flash.
4. Press the + or - buttons to adjust minutes.
5. Press and release the SOUND ALARM 2 button to choose from 5 nature sounds or basic alarm sound.
6. The date area will read BEEP which is default.
8. Press and release the SOUND ALARM 2 button to confirm and exit. Your sound alarm is set and active.
Note: When alarm time is reached the alarm will increase in volume over a 5 minute period, to volume 8.
After 5 minutes the alarm will stop if not deactivated.
Set Light Alarm:
1. Hold the LIGHT ALARM 1 button for 3 seconds to enter alarm time set mode. The alarm hour will flash.
2.Press the + or - buttons to set alarm hour
3.Press the LIGHT ALARM 1 button to confirm and move to the minutes. The alarm minutes will flash.
4.Press the + or - buttons to set the minutes.
5.Press and release the LIGHT ALARM 1 button to exit settings.
• When alarm time is reach the White Mood light will begin to glow and increase intensity over a 5
minute period to 99%. It will stay at 99% for another 5 minutes unless turned o.
• When the alarm is turned o the alarm icon will disappear.
Page | 5
To Next Page
Loading...
Need help?
General
