La Crosse Technology, Ltd. Page 9
• Look for heat sources such as sunlight, door or window frames, or reflected heat of
cold.
Fahrenheit/Celsius
Wireless Thermometer: Press the SET/°F/°C button to select Fahrenheit or Celsius
temperature readout.
Time is off by hours
• This Wireless Thermometer has manual set time.
• Use the program menu to set the time.
Manually Set Time/Date: Program Menu
The SET/°F/°C button moves through the program menu. The MIN/MAX/+ button
changes the value.
• 12/24-HOUR TIME: Hold the SET/°F/°C button for 2 seconds. 12H will flash. Press and
release the MIN/MAX/+ button to select 24-hour time format. Press and release the
SET button once to move to the hour.
• HOUR: The Hour will flash. Press and release the MIN/MAX/+ button until the correct
hour is shown. Press and release the SET button once to move to the minutes.
• MINUTES: The Minutes will flash. Press and release the MIN/MAX/+ button until the
correct minutes are displayed. Press and release the SET button once more to exit the
program menu.
Note: When no buttons are pressed for ten seconds, the Wireless Thermometer will save
the last change and default back to normal mode.
Wireless Thermometer has missing segments
• This is generally a power related issue.
• Batteries may be overpowered or underpowered. Remove batteries from Wireless
Thermometer.
• Press any button 20 times. Leave the Wireless Thermometer unpowered for 1-2 hours.
• Install fresh alkaline batteries with correct polarity.
Wireless Thermometer is dim
• Most Wireless Thermometers have a gray background. Place the Wireless
Thermometer at eye level. Is it still dim?
• Wireless Thermometers that sit in the sunlight can develop a cloudy film over time.
• This is generally a power related issue.
• Batteries may be overpowered or underpowered. Remove batteries from Wireless
Thermometer.
To Next Page
Loading...
