Audio Input
Audio Input Jack
• Insert your audio input cable (not included) into audio
input jack on the back of the weather station to listen
to music. Hold the power button until you see a purple
• Use the or on front to adjust the volume (10 levels).
Page | 4
Note: If a phone call is made or
If the weather station is unplugged briefly and is plugged in again, the
light flash once. Then the sound will come through the speaker.
received, the bluetooth connection will be
temporar ily interrupted. It will automatically reconnect after the call.
Bluetooth 2.1 Operation
BT001
Look for this
name: BT001
Step 1:
Hold the Bluetooth Power
Button for a few seconds to
start syncing
Step 2:
Activate Bluetooth
on mobile device
Step 3:
Play your music from
your mobile device. Adjust
volume if necessary.
Press the button to
disconnect
Touch to adjust
the volume
Press to pause and
play music
The LED will
blue alternately
when syncing
and blue when
connected.
Note: connection
clarity will vary
based on Apps
used to play
music
Press and hold for 3
seconds, will disconnect
the BT connection
Note:
weather station will lose Bluetooth connectivity.
SORTIE
AUDIO
PORT
DE CHARGE
SORTIE : 1Amp
ALARME 1 ALARME 2
RECHERCHE
TX/RCC
INTENSITE DU CERCLE
FORT/FAIBLE/OFF
SORTIE
AUDIO
PORT
DE CHARGE
SORTIE : 1Amp
ALARME 1 ALARME 2
RECHERCHE
TX/RCC
INTENSITE DU CERCLE
FORT/FAIBLE/OFF
To Next Page
Loading...
Need help?
General
