To Next Page

To Previous Page

Quick Start Tutorial

PLM Series Quick Start and Field Reference Guide Rev 1.3.5

▸ 100/1000 Base-T wired Ethernet adapter and/or 802.11 wireless Ethernet adapter

▸ A touch-screen Tablet style interface is recommended for optimal user experience

The minimum computer specications for using the Lake Controller software are:

▸ 1 GHz Processor

▸ 512 MB RAM

▸ 128 MB video RAM WinXP, “emulation” for Win 7 (ensure latest video drivers are installed)

▸ Windows XP Service Pack 2

▸ Microsoft DirectX

8.1 or later

▸ 100/1000 Base-T wired Ethernet adapter and/or 802.11 wireless Ethernet adapter

When using large Lake processor systems it is recommended that a computer exceeding the minimum

specications is used. If you are unsure about installing PC software, please contact an IT specialist.

6.3.3 Software Installation

The Lake Controller software is installed by inserting the CD in the computer’s CD drive, or USB key into

a USB port and allowing the auto-setup routine to run. If auto-run is disabled on the computer, access the

associated drive via Windows Explorer and run Lake_Setup.exe. Select INSTALL then LAKE CONTROLLER

SOFTWARE on the software installation screen that is displayed. For most installations, the suggested

default installation paths can be accepted.

If you are using a computer without a CD/DVD drive, the latest software can be downloaded from http://lab-

gruppen.com/support/software_rmware/ after completing an online registration form. It is recommended

that all users verify they are using the latest version of software.

Once the software is installed, the application is launched by double-tapping the LAKE icon on the Windows

desktop. Please refer to the Lake Controller Operation Manual for further details on software installation and

PC conguration.

6.3.4 Software and Firmware Updates

Regular software and rmware updates are available for the Lake Controller software and PLM Series

devices. Please check for updates regularly to ensure you have the latest features and improvements, and

review the release notes to ensure familiarity with new features and other improvements.

Registered users will receive email notication of updates as they become available. The latest updates are

also available from http://labgruppen.com/support/software_rmware/

Please refer to the Lake Controller Operation Manual for further details on the rmware upgrade procedure.

Lab.gruppen PLM Series Quick Start Guide

Other manuals for Lab.gruppen PLM Series