EasyManua.ls Logo

Labconco CentriVap 7812010 - Vacuum Line Traps; Space Requirements

Labconco CentriVap 7812010
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2: Prerequisites
Product Service 1-800-522-7658
5
Vacuum Line Traps
When evaporating acids, it is advisable to include a soda lime acid secondary trap
in the vacuum line. This adds additional protection for the pump.
NOTE: Several components within the CentriVap are made from stainless
steel or aluminum and can be degraded if exposed to acids. Before
evaporating acids, be sure to contact Labconco.
A moisture trap, solvent trap and radioisotope trap are also available. Refer to
Appendix D: CentriVap Accessories for ordering information.
Space Requirements
Refer to Appendix C: CentriVap Specifications for dimensional drawings of the
CentriVap.
No person or any hazardous material should be within 12 inches of the CentriVap
Concentrator while it is operating.

Related product manuals