EasyManua.ls Logo

Labconco FreeZone Plus - Computer Connection

Labconco FreeZone Plus
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Product Service: Domestic 1-800-522-7658, International 816-333-8811
Chapter 6: Modifying Your Freeze Dryer
Pin 6 – Collector Temperature
Output: -68°C = 0 VDC
+32°C = 1 VDC
Pin 7 – Blank
Pin 8 – Blank
Computer Connection
Connection diagrams for RS232 interface from
Labconco equipment to a computer that supports either
a 25 pin D-sub male connector or 9 pin D-sub male
connector for serial communication. See Appendix D:
Freeze Dryer Accessories for available connection
cables.
Computer with a 25 pin male serial connector
View from back of computer
3-RX (Receive Data)
4-RTS (Request to Send)
5-CTS (Clear to Send)
6-DSR (Data Set Ready)
7-GND (Signal Ground)
8-DCD (Data Carrier Detect)
20-DTR (Data Terminal Ready)
View from front of Labconco
Freeze Dryer
1-TXD (Transmit Data)
4-AGND (Analog Ground)

Other manuals for Labconco FreeZone Plus

Related product manuals