LaboGene SCANLAF Mars PRO-1800 User Manual

Mars-Mars PRO
User Manual
Code No. 9.900.900.710
U:\QA\Manualer\Arkiv\Manuals- Labogene-Origio-GKO\Manualer-WORD\ScanLaf\Mars Mars Pro manual-UK - rev. 06.doc
Page 13 af 34
6.1 ..Property of materials
Units
Material
Treatment
Support stand
Steel 1203, 2 mm
Polyester-coated RAL 9016MAT
Front shield
Al Mg, 3,2 mm
Polyester-coated RAL 9016MAT
All other painted parts
Steel 1203, 1,5 mm
Polyester-coated RAL 9016MAT
Trough and tabletop
Stainless steel AISI 304
Polished
Internal main and exhaust
plenum
Galvanized steel
Damping plate
MPM
Sandwich: Galvanized -
Viscoelastcal-Galvanized
Front / Side Windows
Laminated / tempered
2×3 mm / 1×5 mm
7. Installation
Transport of the ScanLaf Mars / MarsPRO can be carried out by lifting the cabinet using a forklift
either sideways under the support stand or directly under the trough. Furthermore the cabinet can be
moved manually by using hooks in the dedicated holes in the support stand.
Whenever transportation of the cabinet is needed, precautions should be taken to prevent
it from overturning due to the high-located mass centre.
In order to prevent damage to the cabinet it must be handled as fragile goods.
Storage of the cabinet must be in an environment of maximum 80 % relative humidity and at
temperatures between 5
o
C to 50
o
C.

LaboGene SCANLAF Mars PRO-1800 Specifications

General

Brand	LaboGene
Model	SCANLAF Mars PRO-1800
Category	Laboratory Equipment
Language	English