Mars-Mars PRO
User Manual
Code No. 9.900.900.710
U:\QA\Manualer\Arkiv\Manuals- Labogene-Origio-GKO\Manualer-WORD\ScanLaf\Mars Mars Pro manual-UK - rev. 06.doc
Page 7 af 34
2. Introduction
You are now in possession of a high quality microprocessor-controlled Class II cabinet, Mars-Mars
Pro, designed to provide protection of the operator, the environment, and the processed product
against particle-/microbiological contamination.
The cabinet complies with the requirements stipulated in EN 12469 and DIN 12980-for Mars Pro,
only.
The ScanLaf Mars/Mars Pro Class II cabinets have:
Microprocessor controller with:
LCD display indicating fan and alarm status.
Air velocity sensors.
Clock (7 days) and hour-counter.
Pre-setting of automatic start-up, timer for delay start and timer for UV-light.
Alarm for any deviation from safety conditions.
Full programming of alarms and fans through pass word protection.
Ergonomically correct sloping front for maximum operator comfort.
Motor-driven front window, with both sliding and hinged modes.
Side windows, for perfect light conditions and view to the surroundings.
Negative pressure plenum for highest operator and product safety.
Opportunity to select FAN off, reduced, or normal air velocity.
Divided table tops for easy cleaning and legs for increased stability.
Digital El direct adjustable Fan speeds.
To Next Page
Loading...
Need help?
General
