EasyManua.ls Logo

LabStyle Dario - Interpreting the Results; Measurement Range

LabStyle Dario
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
Interpreting the Results
If the displayed test result is consistent with how you feel, continue as
instructed by your health care provider.
If the test result
is
inconsistent
w
ith
how
you feel
,
check your
Dario System by running a control solution check, as described in
Performing a Control Solution Test
on page
35
. Repeat the blood
glucose test afterward. If your blood glucose result is still
inconsistent with how you feel and you have followed the
instructions provided in this chapter, follow your health care
provider’s instructions.
Do not change your treatment based on a single result that
is
inconsistent with how you feel or if you believe that your test
result is incorrect. The blood glucose reading displayed on your
smart mobile device by Dario System should not be the only
information you use to make decisions about your health.
Always consult your health care provider to interpret and
understand the measurement results.
Measurement Range
Your meter measures blood glucose results in the range of 20 mg/dL to 600
mg/dL (1.1-33.3 mmol/L). Results outside of this range should be reviewed
according to the following information.
If your test result is lower than 20 mg/dL (1.1 mmol/L), “LOW!
Measure with a new strip, if recurs contact your physician
immediately” displays instead of a result.
LOW may indicate that your blood glucose is very lo
w (possibly
severe hypoglycemia). Follow your health care provider’s
instructions immediately and repeat the test.
If the result is higher than 600 mg/dL (33.3 mmol/L), HIGH!
Measure with a new strip, if recurs contact your physician
immediately” displays instead of a result.

Table of Contents