LabStyle Dario - Page 50

50
4. Remove a test strip from the cartridge, as shown in the image below.
5. Close both the lid and cartridge cover.
If the cover does not close properly,
you may not have inserted
the cartridge correctly.
6. Hold the test strip with the gold contacts facing upward.
7. Without bending the strip, insert it into the test strip port of the Dario
Glucose Meter as far as it will go.
Verify the
test strip direction
,
as shown
in the image
below
.
The Dario App instructs you to place a drop of blood on the test strip, as
shown in the image below.
!