Ultimate-cell Stackable Shaking Incubator V2017.2
12
5. PREPARATION AND START-UP
5.1 Unpacking
At delivery, examine the exterior for physical damage while the carrier’s representative is
present. If exterior damage is present, carefully unpack and inspect the equipment and all
accessories for damage. If there is no exterior damage, unpack and inspect the equipment
within five days of delivery. If you find any damage, keep the packing materials and imme-
diately report the damage to the carrier. Do not return goods to the manufacturer without
written authorization. When submitting a claim for shipping damage, request that the carrier
inspect the shipping container and equipment.
5.2 Lifting / Handling
These units are heavy and care should be taken to use appropriate lifting devices that are
sufficiently rated for these loads. Units should only be lifted from their bottom surfaces.
Doors, handles and knobs are not adequate for lifting or stabilization. The units should be
completely restrained from tipping during lifting and transport to prevent shifting and
damage.
The depth of the incubator is 934mm, when moving the incubator through pathway, the door
handle can be removed, so that the depth reduces to 867mm. To do so, please follow the
below instructions,
Open the front door to "half" open position.
DANGER!
Don't use force to open the door to full open position when
the unit is powered off.
Excessive force will cause damage to the door.
To Next Page