Ultimate-cell Stackable Shaking Incubator V2017.2
1
TABLE OF CONTENTS
1. INTRODUCTION 3
2. SAFETY PRECAUTIONS 4
3. ENVIRONMENTAL REQUIREMENTS 6
4. TECHNICAL DATA 7
4.1 Dimensions 7
4.2 Standard Functions 9
4.2.1 Main Unit 9
4.2.2 Door 9
4.2.3 Inner Working Chamber 9
4.2.4 Shaking Control 10
4.2.5 Temperature Control 10
4.2.6 Control Electronics 10
4.2.7 Front Door & Shaking Tray Operation 10
4.2.8 Shaking Speed and Shaking Diameter 10
4.2.9 Specifications 11
5. Preparation and Start-up 12
5.1 Unpacking 12
5.2 Lifting / Handling 12
5.3 Leveling the Units 13
5.4 Preliminary Cleaning 13
5.5 Electrical 13
5.6 Connect the Power Supply 14
5.7 Installation of Flask Clamps (Applies P6022 predrilled tray) 14
5.8 Installation of Sticky Mat (Applies P6023 plain tray) 14
5.9 Set of Capillary Thermostat 15
5.10 Operation of Shaking Diameter Adjustment 15
5.11 Extra For Refrigerated Units 18
5.12 Installation of Direct Steam Humidification System (Option) 18
5.13 Installation of CO2 gas supply hose (Option) 18
6. OPERATING THE UNIT 19
6.1 Home Page Summary 20
6.2 Set Menu Page Summary 22
6.3 FUNC Page Settings 23
6.3.1 Switch of Control Mode - Temperature & Speed 24
6.3.2 Switch of Keep Function-Temperature Holding Function 24
6.3.3 Option Switch of Direct Steam Humidification Function 24
6.3.4 Option Switch of CO2 Gas Control Function 24
6.3.5 Option Switch of Photosynthetic Lighting Control Function 25
To Next Page
Loading...