Ultimate-cell Stackable Shaking Incubator V2017.2
2
6.4 Operating Temperature and Speed System 25
6.4.1 Operating Under Fixed Value Control Mode 25
6.4.2 Operating Under Programmable Control Mode 27
6.5 Operating Photosynthetic Lighting System 30
6.5.1 Operating Under Fixed Value Control Mode 30
6.5.2 Operating Under Programmable Control Mode 31
6.6 Operating the Humidity System 33
6.7 Operating the CO2 System 34
6.8 Setting Defrosting Cycle 34
6.9 Setting Clock Time 36
6.10 Setting Door Password and Communications 37
6.10.1 Door Locking Password Setting 37
6.10.2 RS485 Communication Address Setting Option 38
6.11 Using USB Data Logging System 38
6.12 Using UV Light 38
6.13 Using Sticky Mat 39
6.13.1 Loading/Unloading the Sticky Mat 39
6.13.2 Uninstalling the Sticky Mat 39
6.13.3 Adhesive Strength 39
6.13.4 Safety 40
7. CALIBRATING THE UNIT 41
7.1 CALIB TEMP—Calibrating the Temperature Display 41
7.2 CALIB HUMI—Calibrating the Relative Humidity Display 42
7.3 CALIB CO2—CO2 Calibrating the CO2 Concentration Display 42
7.4 Restoring Factory Default Settings 43
8. ALARMS 44
9. MAINTAINING THE UNIT 45
9.1 Recommended Daily Maintenance Checks 45
9.2 Recommended Annual Maintenance Checks 45
9.3 Recommended as Required 45
9.4 Replacing the Fuse 45
9.5 Cleaning Cooling Condensers 46
9.6 Cleaning and Replacing the Sticky Mat 46
10. ELECTRONIC CONTROL SYSTEM 47
11. TROUBLE SHOOTINGS 48
12. AFTER-SALE SERVICE 50
To Next Page
Loading...