Ultimate-cell Stackable Shaking Incubator V2017.2
32
To set the lighting outputs of under "Programmable" control mode,
Press "SET" in the home page
Press "LIGHTS" in the "SET" page to start setting the photosynthetic lighting
system
Switch the control mode to "PROG"
SEG—Segment No.
The function indicates the serial number of current segment. No setting required.
RAMP—Ramp Time
This function indicates the time duration required for temperature to reach from
current actual value to the ramp end (temperature) value. Use the keyboard to enter
the ramp time from 0-999.9mins.
RED—Ramp End Red Light Output button
To Next Page