LaCie 12big Rack Network Troubleshooting & Problem Solving
User Manual page 28
4.2.3. Cooling Fan LEDs
An Amber LED incorporated in each fan module monitors its sta-
tus, constant On indicates a Fault condition while a flashing light
indicates that the fan ident is On. The LED is Off during Normal
operation.
4.2.4. Drive Carrier Module LEDs
Disk drive status is monitored by a GREEN LED and an AMBER LED
mounted on the front of each Drive Carrier module, shown in Fig.
18. The LED conditions are defined in section 4.6. Drive Carrier
Module Faults:
4.2.5. Rear Panel LED
Table 09 - Rear Panel LED Status
Enclosure
ID LED
Blue (when
activated)
Activated by push button on
the Ops Panel, or by system
software. Used to identify a
server from among several
servers
Fig. 18 - Drive carrier LEDs