Status LEDs
The LEDs help you identify the status of 2big RAID’s system and drives.
1. System status
2. Drive status
LED State
Off Device powered off
Solid blue Ready
Blinking blue Accessing hard drive (normal operation)
Slow blinking blue, 10 second
interval
Power-saving mode
Fast blinking blue Device starting up or shutting down
Blinking red and blue RAID initialization or synchronization
Blinking red, 1 second interval Temperature warning
Solid red Temperature critical
Technical note regarding power-saving mode and Windows—The device can be placed into
power-saving mode on PC’s running Windows 10 or higher. However, it is possible that the LED will
remain off rather than flash blue every 10 seconds.
To Next Page
Loading...
