macOS and Windows. Install Toolkit to help you initially set up the drives for performance or protection. See
RAID Setup in the Toolkit user manual for details.
If you use 2big RAID with only one type of computer, you can optimize file copy performance by formatting the
drives in the native file system for your operating system. Choose one of the following methods to optimize your
drive:
Use Toolkit to optimize disk format. See Optimize in the Toolkit user manual for details.
Manually format your drive. See Optional Formatting and Partitioning for details.
Disconnecting the hard drive
In order to avoid file system corruption, it’s important to unmount the drive volumes before disconnecting the
interface cable. See Safely Remove LaCie 2big RAID From Your Computer for details.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication
is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the
client, the status code 403 (Forbidden) can be used instead. The 410 (Gone)
status code SHOULD be used if the server knows, through some internally
configurable mechanism, that an old resource is permanently unavailable and
has no forwarding address.
To Next Page
Loading...
