Toolkit will not launch the RAID setup wizard in the following circumstances:
Toolkit was previously installed on your computer—for example, for use with another Seagate or LaCie
device.
The RAID level and/or format for your device were changed from their factory settings.
Comprehensive RAID management
If you’ve made changes to your RAID configuration or Toolkit is already installed, you can manage RAID levels
and formatting using LaCie RAID Manager, a comprehensive tool for all of your RAID-compatible devices.
Learn more about LaCie RAID Manager
LaCie RAID Manager for 2-Bay Devices
Download LaCie RAID Manager
Supported operating systems
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication
is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the
client, the status code 403 (Forbidden) can be used instead. The 410 (Gone)
status code SHOULD be used if the server knows, through some internally
configurable mechanism, that an old resource is permanently unavailable and
has no forwarding address.
To Next Page
Loading...
