10. Attach flexible hose to cyclone funnel and secure with hose clamp.
11. Attach 2" swivel casters to collection drum, using 5⁄16"-18 hex nut on each.
12. Adjust pre-installed flange nut and hex nut until drum rolls evenly without rocking or
wobbling, then tighten both nuts to secure caster in place.
13. Attach handle to collection drum using 1 ⁄4"- 20 x 5 ⁄8" Phillips head screws and ¼”-
20 acorn nuts.
14. Insert large plastic dust bag inside collection drum, and fold excess length of bag over
top of collection drum.
To Next Page