22 Installation Manual 2014 - Riv 2
Setting the Heating Water Temperature
To set the heating water temperature, touch the ‘setting temperature’ as indicated.
The controller will bleep and the screen will change to the following , enter the default
access code 112233, then press enter.
The display will revert to the home screen. Touch the ‘setting temperature’ again, the
display will change again, this time enter the temperature and press enter.
Once again, the display will revert to the home screen, and the set temperature will be
displayed.
1 2 3 4 5
6 7 8 9 0 Clr
oo
To Next Page