Installation Manual 2013 Riv 2 4
Thank you for purchasing a Lailey and Coates Air source Heat Pump.
Please read this manual carefully before installation and operation. It contains
important
information to enable a safe and successful installation. If you have any queries please
ring our Technical Helpline on 01753-537830 before running the Heat Pump.
Safety Instructions
To prevent injury/damage to persons or property the following instructions should be
followed at all times:
· This product should only be installed by Approved Lailey and Coates partners. All
installation engineers should be suitably qualified and made aware of the contents
of this manual.
· Repairs and Maintenance should be carried out by Approved Lailey and Coates
partners to ensure validity of Warranty.
· Internal and external units should be securely fixed to solid surfaces ensuring a
minimum support weight of 20g/mm2.
· All local regulations, by-laws and standards should be checked and adhered to at
all
times.
· Internal and External Units should be installed as per guidelines in this manual
ensuring adequate ventilation and airflow around the units.
· Care should be taken when cleaning/installing product so as to avoid water
ingress,
electric shock or damage to unit and associated pipework and cables. Both internal
and External units should be isolated for these purposes.
· This product has been designed for use by persons with experience of Heating
controls and as such should not be operated by children or persons with reduced
physical, sensorial or mental faculties unless supervised by a responsible person.
To Next Page
Loading...