Lainox COMPACT CEV Series User Manual

 
16  PLUS - Special Functions
16.6 - FINISH
Finish is a special function which is
used in combination with the last or
only cooking cycle. It enables a gradual,
controlled increase in oven temperature
in convection mode in order to obtain
the desired AU GRATIN - DRYING
effect.
The best FINISHING results are
obtained when the last cooking phase
includes temperature control with the
core probe. The probe establishes the
right time to turn the function on based
on the the level of FINISH desired.
FINISH “OFF”: No finish
SOFT” FINISH”: delicate browning;
MEDIUM FINISH: normal browning;
HARD” FINISH”: marked browning.
The FINISH is an integral part of the last
cycle of the program. If the last cycle
is time based, the finish function will
automatically turn on before the end
of the cooking cycle in proportion to
the selected degree of FINISH; if the
cycle includes operation with the core
probe, the higher the degree of finish,
the earlier the function will be turned on.
During the FINISH function, no cooking
parameters can be changed.
The end of cooking signal tells you the
food has been cooked to the desired
degree of FINISH.
SETTING FINISH
 Press “PLUS” directly on the touch screen
to access the Special Functions.
 Select “Finishing” directly on the touch
screen or turn the Scroller+ to “Finishing”
and confirm by pressing the Scroller+.
Manual
03/
03
FFF
AST AST AST DDD
FFF
FFF
RRR
YYY
RRR
RRR
CYCLES
05’
130°
SET
130°
%
30
Impostazione
Special Functions
Total cooking time
Delta T cooking
Vent management
Fan management
Hold
Finishing
Multiprobes
Core temp. Probe
90027560rev00

Lainox COMPACT CEV Series Specifications

General

Brand	Lainox
Model	COMPACT CEV Series
Category	Oven
Language	English