Next, preheat the oven, if necessary, by
pressing the “Pre-heat” key.
Insert the probe in the connection
(10),
place the food in the oven and insert the
probe, then confirm insertion by pressing
touch screen.
If the oven is already preheated, press
Five degrees before reaching the set
core temperature, an information window
cooking, in order to give the operator time
to organize distribution.
Scroller+ to close the window.
Manual
03/
03
CYCLES
Multiprobes
130°
SET
130°
%
30
Impostazione
Cooking with probe.
Has the probe been inserted?
SI
Manual
03/
03
CYCLES
Multiprobes
130°
SET
130°
%
30
Impostazione
Remaining cooking
5 time in degree
OKOK
16 PLUS - Special Functions
90027560rev00
To Next Page
Loading...
