16 PLUS - Special Functions
16.7 - CORE TEMPERATURE PROBES
The special Core Temperature Probes
function allows you to monitor the core
temperatures in the single points of the
multi-point core probe.
Press “PLUS” directly on the touch
screen to access the Special Functions.
•
Select “Core Temp. Probe” directly
on the touch-screen, or rotate the
Scroller+ until you are positioned on
“Needle probes” and then confirm by
pressing the Scroller+.
•
The temperatures of the single probe
points are displayed for a more
accurate control.
parameters again.
Manual
03/
03
CYCLES
05’
130°
SET
130°
%
--
Setting
Manual
03/
03
CYCLES
05’
130°
SET
130°
%
--
Impostazione
Special Functions
Total cooking time
Delta T cooking
Vent management
Fan management
Hold
Finishing
Multiprobes
Core temp. Probe
Manual
03/
03
CYCLES
68°
130°
SET
130°
%
30
Impostazione
Special Functions
Total cooking time
Delta T cooking
Vent management
Fan management
Hold
Finishing
Multispillone
Sonde Spillone
Probe values
Core temp. probe point 1
Core temp. probe point 2
Core temp. probe point 3
Core temp. probe point 4
65 °C
63 °C
60 °C
58 °C
90027560rev00